KYMCO CV3 Series User Manual

3
Checks before Riding
94
6
Check Front/Rear Brake Lining
 Is braking effective?
 Verify the braking effect of the front and rear brakes
at low speed.
1. Brake Disc 2. Brake Pad Lining
 Check Brake Lining Limit
Check the brake lining, when the wear limit is reached,
please contact the KYMCO dealer shop for replacement.
Check Tires
 Check the ground-contact status of the tire and see if
the tire air pressure is normal. If low, inflate the tire to
reach normal pressure.
 In case of a gripping anomaly, check tire pressure for
normal readings using a pressure gauge.
Pressure measurements of cool tire:
With 1 rider
Front wheel 2.0 kgf-cm
2
Rear wheel 2.70 kgf-cm
2
With 2 persons
Front wheel 2.0 kgf-cm
2
Rear wheel 2.70 kgf-cm
2
 Check the tire grooves for any metal or pebble chips;
remove them, if present, before riding.
 Replace the tire if there is a fracture or the limit of the
groove depth is reached.
Warning
When the tire pressure is very low or the tires are
incorrectly balanced, riding of the vehicle will lead to
dangerous rotational vibrations.
Service Limit

KYMCO CV3 Series Specifications

General

Displacement	550.4 cc
Front Suspension	Telescopic fork
Rear Tire	160/60-15
Fuel Capacity	15.5 liters (4.1 gallons)
ABS	Yes
Max Power	51 hp @ 7500 rpm
Fuel System	Electronic fuel injection
Transmission	CVT
Front Brake	Dual disc
Rear Brake	Single disc
Weight	280 kg
Seat Height	795 mm
Max Torque	53 Nm @ 5750 rpm
Front Tire	120/70-15