Name: KYMCO CV3 Series
Brand: KYMCO
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Proper Riding Method

Starting the Engine

1. Lift up Main Stand before starting the engine.

2. Check oil and gasoline content before starting the engine.

Engine Stop Switch

: Engine will stop and cannot be started when setting

switch to this position. Re-start of engine is only possible

after setting the switch to position.

: The Engine can be started when setting the switch to

this position.

Caution

3. The Main Power is cut off when the Engine Stop Switch

is set to the position, therefore pulling the Brake

Lever and pushing the Start Button will not activate the

motor.

4. The Engine Stop Switch is meant for a temporary engine

stop only.

1. Confirm that the KEYLESS car key is within sensing

range.

2. Press the main switch button to turn power ON.

3. Make sure the throttle grip is fully closed.

4. Confirm that the engine stall switch has been switched to

" ".

Questions and Answers:

Need help?

Do you have a question about the KYMCO CV3 Series and is the answer not in the manual?

KYMCO CV3 Series Specifications

General