EasyManuals Logo

KYMCO CV3 Series User Manual

KYMCO CV3 Series
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
3
Simplified Maintenance and Repair
113
7
Change Oil
Oil Change Period
First oil change when running 1000 km; afterwards every
5000 km. In order to maintain optimal engine
performance, check the oil level every 1,000 km.
Replenish to standard level in case of shortage.
Applicable Temperature of Engine Oil
Caution
To avoid using poor quality oil, please go to a KYMCO
dealer for oil change.
Oil Change Period
1. Remove Oil Level Guide.
Remove Drain Bolt.
Drain all the oil. Warming up the engine before
changing oil facilitates oil draining.
2. Clean Oil Screen and re-install it. Tighten Drain Bolt
after wiping it clean.
3. Fill the fresh engine oil and the replenishing volume
Oil Capacity:
Dismantle: 3.0L (full capacity)
Change oil: 2.6L (excluding oil filter)
2.7L (including oil filter)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KYMCO CV3 Series and is the answer not in the manual?

KYMCO CV3 Series Specifications

General IconGeneral
Displacement550.4 cc
Front SuspensionTelescopic fork
Rear Tire160/60-15
Fuel Capacity15.5 liters (4.1 gallons)
ABSYes
Max Power51 hp @ 7500 rpm
Fuel SystemElectronic fuel injection
TransmissionCVT
Front BrakeDual disc
Rear BrakeSingle disc
Weight280 kg
Seat Height795 mm
Max Torque53 Nm @ 5750 rpm
Front Tire120/70-15

Related product manuals