Checks before Riding
99
Check Front/Rear Cushion
Hold the front brake. Press the handlebar hard several
times and then check if the front fork is operating and
bouncing smoothly. When detecting any damage or if the
front fork cannot operate smoothly, please contact
KWANG YANG service center for inspection or
replacement.
Check if Head Light, Tail Light or Winker goes on
normally.
Start engine and turn on switches, check if Head Light,
Tail Light or Winker goes on normally, and check for any
stain or fracture on the light lens.
Check Dashboard for normal display.
Check the Horn for working normally.
Set the KEYLESS Main Switch in the “START” position
and then press the “HORN” button switch.
Check Rear View Mirror for proper angle.
Sit yourself on Seat Pad and check the rearview of the
mirror; also check for any damage or stain.
Considering actual riding safety, a torque is specified by
the statutory regulation as of 1.02-1.428 Kgf-m.
Therefore when fixing the Rear View Mirror onto the
vehicle, it shall not be totally rigid (either exceptionally
loose).
Check the License Plate for any Stain or Damage.
Check License Plate for any stain or damage; secure it
tightly.
Check for normal exhaust gas.
Check Muffler for slackening or noise.
For any others, check if previous anomalies still exist.
To Next Page
Loading...
Need help?
General
