Control Functions of Mechanism
46
Front Suspension in the meantime.
7. If the voltage of the vehicle is low, the Front
Suspension Lock will execute the unlocking function
only. When the system determines that the vehicle
has been supplied with sufficient voltage, the Front
Suspension Lock will resume its normal operations.
8. If the system is abnormal, the Front Suspension Lock
warning lamp will display in orange. After emitting a
long warning sound for 6 seconds, the system will
release the locking automatically; or the system will
release the locking when the warning sound is
emitted intermittently.
Conditions required for Front Suspension Lock
automatic shutdown
1. When the vehicle speed is higher than 2km and the
engine revolution is over 2200rpm, the system will
release the Front Suspension Lock automatically. In
the meantime, the Front Suspension Lock warning
lamp will flicker and the Buzzer will sound twice.
2. Tight accelerator status: The system will release the
locking automatically if the short-time revolution of the
engine is over 3000rpm.
3. Parking status: When the vehicle is under still status,
the system will release the locking automatically if the
engine short-time revolution is over 3000rpm.
When parking the vehicle, ensure that the main stand
is erected, the anti-tilt button is pressed, and hand
brake is lifted.
When parked on sloped or uneven surfaces, there are
still risks of tip over even with the anti-tilting lock. The
owner should evaluate and park the vehicle on
appropriate level ground to ensure safety.
To Next Page
Loading...
Need help?
General
