Control Functions of Mechanism
53
a. After turning ON KEYLESS Main Switch, a self-
check is performed with the LED indicator flashing in
a 1-white and 1-red format.
b. After KEYLESS Main Switch ON and indicator self-
check, in the event of a Handlebar Heater anomaly,
the indicator will flash in red, with the Handlebar
Heater function disabled. (Refer to anomaly states
below for indicator flashing modes.)
c. After KEYLESS Main Switch ON, press and hold the
button to activate Handlebar Heater. Indicator lights
in white constantly for normal operation.
d. Turn KEYLESS Main Switch OFF or press and hold
the button to deactivate Handlebar Heater. The
indicator will go out, indicating the function is
switched off.
e. If Handlebar Heater is faulty, the indicator will flash
in red.
Troubleshooting
After re-starting (Key Off → Key On) the vehicle,
indicator will resume normal operation. Clicking the
button when the indicator is flashing in red will stop the
flashing. For the sake of your safety, please go to a
KYMCO dealer for check-up.
Dashboard Level Indication:
a. On activation of heating function, Dashboard will
receive signal from controller and display the current
heating level to the user.
b. Level Indication:
• Level 1: 45℃
• Level 2: 55℃
• Level 3: 65℃
• Heating Function OFF: All goes off.
To Next Page
Loading...
Need help?
General
