COMMAND CENTER Pages
Operation Guide 17
Printer > System > APL. Filter
This page allows you to configure the APL. Filter. The APL. Filter is a function that
converts the received print data to the specified code and prints that data.
Printer > System > APL. Filter Parameters
Configure items that can be set differently between APL. Filters. You can specify fonts
and the text to be converted.
Printer > Media Input
This page lets you configure paper trays by type and size. You can also configure
cassette groups.
Item Description
Filter
Switches the APL. Filter On or Off.
Filter Name
Selects the APL. Filter. You can select the ASCII to KPDL
conversion process.
Item Description
Font
Specifies the fonts used for printing.
Start of String
Specifies the character string with which the text to be
converted begins. Up to 15 single-byte characters can be
specified.
End of String
Specifies the character string with which the text to be
converted ends. The default setting is \f. Up to 15 single-byte
characters can be specified.
Item Description
Default
Determines the default tray to feed paper from.
Tray
Displays the trays including those provided by option.
Size
Displays the paper size for each input tray. This setting can
be changed using the dropdown list.
Type
Displays the paper type for each input tray. This setting can
be changed using the dropdown list.
Group Settings
If multiple cassettes are available, you can set up to three
groups of cassettes. Cassettes in a group are treated as a
single tray. Paper can be fed continuously from the grouped
cassettes.
To Next Page
Loading...
Need help?
General