Kyocera COMMAND CENTER Multifunctional Printer User Manual

COMMAND CENTER Pages
38 KYOCERA COMMAND CENTER
Advanced > Protocols > IPP
Using IPP (Internet Printing Protocol) or IPP over SSL, you can output to the printing
system over the Internet or an intranet.
Advanced > Protocols > AppleTalk
You can print from Macintosh computers using the AppleTalk protocol.
The printing system network component supports Mac OS of various versions (System
Requirements on page 1) and is compatible with LaserWriter driver version 8.x.
To set up the Ethernet interface to communicate via AppleTalk, enables AppleTalk
protocol operation on the printing system.
Remote Printer
Mode
Enables or disables Remote Printer Mode.
Print Server
Name
Enter the name of the printer server that the remote printer
belongs to.
Job Timeout
Enter the timeout in seconds.
Item Description
Item Description
IPP
Enables or disables IPP.
IPP Port
Number
Sets the port number to be used by IPP. In normal situations,
set this port number to 631.
IPP over SSL
Enables or disables the IPP over SSL protocol.
IPP over SSL
Port Number
Sets the port number to be used by IPP over SSL. In normal
situations, set this port number to 443.
Item Description
AppleTalk
Enables or disables AppleTalk protocol.
Printer Name
Specifies the name of the printing system in the AppleTalk
network.
Zone Name
Specifies the name of the AppleTalk zone (network). An
asterisk (*) means the default zone.

Kyocera COMMAND CENTER Multifunctional Printer Specifications

General

Brand	Kyocera
Model	COMMAND CENTER Multifunctional Printer
Category	Software
Language	English