Kyocera DP-1800 - ENDR - END Raster Data

PRESCRIBE Command Reference
96
ENDR — END Raster data
Format
ENDR;
Parameter
None
Function
The ENDR command declares the end of raster data. To declare the start of raster data, a
RVRD command is used.
File
The following example prints an illustrated crown using the RVRD and ENDR.
!R! RES; DAM; DAF; UNIT C; SRO 1;
MAP 5, 5;
RVRD;
5, 0, 0, 7, 0, 0;
5, 0, 0, 24, 192, 0;5, 0, 0, 32, 32, 0;
5, 0, 0, 64, 16, 0; 5, 0, 0, 64, 16, 0;
5, 0, 0, 128, 8, 0; 5, 0, 0, 128, 8, 0;
5, 0, 0, 128, 8, 0; 5, 0, 0, 64, 16, 0;
5, 0, 0, 64, 16, 0; 5, 0, 0, 32, 32, 0;
5, 0, 0, 120, 192, 0; 5, 0, 0, 103, 0, 0;
5, 0, 0, 96, 0, 0; 5, 0, 0, 144, 0, 0;
5, 0, 0, 144, 0, 0; 5, 0, 0, 144, 0, 0;
5, 0, 1, 8, 0, 0; 5, 0, 1, 8, 0, 0;
5, 0, 1, 136, 0, 0; 5, 0, 2, 68, 0, 0;
5, 0, 2, 36, 0, 0; 5, 0, 2, 36, 0, 0;
5, 0, 6, 66, 0, 0; 5, 0, 5, 130, 0, 0;
5, 0, 4, 6, 0, 0; 5, 0, 8, 9, 0, 0;
5, 0, 8, 17, 0, 0; 5, 0, 14, 17, 0, 0;
5, 0, 17, 9, 128, 0; 5, 0, 16, 134, 128, 0;
5, 0, 16, 128, 128, 0; 5, 0, 32, 128, 64, 0;
5, 0, 49, 0, 64, 0; 5, 0, 46, 0, 64, 0;
5, 0, 64, 28, 32, 0; 5, 0, 64, 34, 32, 0;
5, 0, 64, 65, 32, 0; 5, 0, 128, 65, 16, 0;
5, 0, 184, 65, 16, 0; 5, 0, 196, 34, 16, 0;
5, 1, 130, 28, 8, 0; 5, 1, 130, 0, 8, 0;
5, 1, 130, 0, 120, 0; 5, 2, 68, 0, 132, 0;
5, 14, 56, 97, 7, 0; 5, 10, 0, 145, 5, 0;
5, 11, 255, 255, 253, 0; 5, 8, 0, 0, 1, 0;
5, 15, 255, 255, 255, 0; 5, 4, 0, 0, 2, 0;
5, 52, 8, 1, 2, 192; 5, 76, 8, 1, 3, 32;
5, 76, 8, 1, 3, 32; 5, 68, 62, 7, 194, 32;
5, 34, 8, 1, 4, 64; 5, 34, 8, 1, 4, 64;
5, 18, 8, 1, 4, 128; 5, 13, 0, 0, 11, 0;
5, 1, 0, 0, 8, 0; 5, 0, 128, 0, 16, 0;
5, 0, 131, 12, 16, 0; 5, 0, 64, 144, 32, 0;