EMCR
89
EMCR — Enable MaCRo depending on paper
source
Format
EMCR mode, paper-source [ = print-side], [repeat-count] macro-name
[, parameter...];
Parameters
mode:
E = enable automatic macro
D = disable automatic macro
paper-source:
0 = multi-purpose feeder
1 = cassette 1 (printing system’s cassette)
2 = cassette 2
3
= cassette 3
4 = cassette 4
5
= cassette 5
6 = cassette 6 (bottom)
99
= envelope or universal feeder
print-side:
side of the page the macro is executed when duplex-printing
0 = front
1 = back
repeat-count:
number of times the macro is executed
macro-name:
name defined by the MCRO command
parameter:
values given to the dummy parameters in the macro definition
To Next Page
Loading...
