SPAL — Select PALette
Format
SPAL id;
Parameter
id:
palette ID number: 0 to 32767 (default is 0)
Function
The SPAL command selects the palette to activate from among the palettes that are
currently available. If no palette is associated with the specified number, this command is
ignored.
The palette activated by SPAL is deleted when a new palette is created by the CID
command. The active palette number does not change. All palettes are deleted by the
reset command, leaving only the default palette.
File and Printout
See ACLI on page 12.
To Next Page
Loading...
