PRESCRIBE Command Reference
114
FRPO INIT — FRPO-INITialize
Format
FRPO INIT;
Parameter
None
Function
The FRPO INIT command resets all FRPO parameters to their original, factory default
values. This reset applies to the interface dependent parameters for the current interface
as well as all non-interface dependent parameters. For a list of the factory default values,
see Chapter 6 of the Technical Reference manual. The FRPO INIT command causes a
page break.
To activate the changes made with the FRPO INIT command, turn the printer power off
then on again or reset the printer using the control panel keys.
File
!R! FRPO INIT; EXIT;
Printout
Omitted
To Next Page
Loading...
