Administration
1
In the navigation area, select a role or user.
2
Click the Add user icon.
3
In the Add user dialog box, under Select user type, select Login user or
Subscribers (for receiving alerts and reports only).
Administrators can set privileges, a login name, and contact information.
The contact information is used for alert and report subscriptions by e-mail.
4
Under Required Properties, enter information as defined by user type and
required by alerts. Do not use invisible Unicode or extended ASCII characters.
5
Under Optional Properties, enter optional user information.
6
Click OK.
User Properties
User Properties displays and sets details about the user. You can view and
edit properties, change a password, and delete or disable an account. An
administrator or user must be selected in the navigation area.
Changing the Password
An administrator or user can change the password used to log on to the
application.
1
Select an administrator or user in the navigation area.
2
Select User properties.
3
Click Change password.
4
Type the new password, and type again to confirm.
5
Click OK.
Subscriptions
Subscriptions can be created for groups, and child groups inherit subscriptions
from parent groups. Inheritance is only available for dynamic groups, and not
for manual groups. A dynamic group is a device group established by user-
defined device filters.
In the Alert Sets area, inherited subscriptions are shown in gray, and the parent
group from which the subscription is inherited is shown in parenthesis.
Alert e-mails can be sent to any user. The application allows Subscribers, as
well as Administrators and Help Desk users. Subscribers do not have access
to the application, but can receive e-mail alerts.
Reports are created in the Device Manager console. Subscriptions to reports
can be created in the Administration or Device Manager consoles.
2-2 User Guide
To Next Page
Loading...
Need help?
General
