14
8 Insert the paper cassette into the slot in
the printer. Push it straight in as far as
it will go.
There is a paper gauge on the right
side of the front of the paper cassette
to indicate the remaining paper
supply. When paper is exhausted, the
pointer
will go down to the level of
(empty).
9 If you have installed a paper cassette
that can hold the Legal size paper,
install the dust cover at the back of the
printer. (The Legal size cassette and the
dust cover are supplied for U.S.A. only.)
Removing the Dust Cover
Paper Gauge
FS3830NIG.book 14 ページ ２００３年１２月１２日 金曜日 午前１０時０分
To Next Page
Loading...
Need help?
General