2LV/2L1/2L2/2MS/2MT
1-4-30
(13) Fusing is loose.
(14) Image is out of focus.
Print example Causes Check procedures/corrective measures
Wrong types of paper. Check if the paper meets specifications, replace paper.
Setup of media
Practical use of half speed printing
Paper creased. Replace the paper.
Flawed heat roller or press
roller.
Replace the fuser unit (see page 1-5-19).
Defective pressure springs.
Defective fuser heater.
Print example Causes Check procedures/corrective measures
Drum condensation. Perform the drum refresh operation.
To Next Page
Loading...
