2PK/2PL/2PM/2PN-5
1-3-79
U995 Mem Data Indi
Description
Displays the memory data.
Purpose
To check the memory data.
Method
1. Press the start key.
2. Select [Print Engine].
3. Press the start key.
4. Press the start key. The setting is set.
5. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Print Engine A display and setup of the Engine section memory
Display Description
Offset Reference offset
Data Reference data
To Next Page
Loading...
Need help?
General
