2PK/2PL/2PM/2PN
2-4-6
Duplex binding N4 0: Off
1: Long edge
2: Short edge
0
Sleep timer time-out time N5 1 to 240 minutes [0: Off] 15
Ecoprint level N6 0:Off
2:On
0
Printing resolution N8 0: 300dpi
1: 600dpi
3: 1200dpi
1
Default emulation mode P1 0: Line Printer
1: IBM Proprinter X24E
2: Diablo 630
5: Epson LQ-850
6: PCL 6
9: KPDL
9 (U.S.A)
or
6 (Euro and
other)
Carriage-return action * P2 0: Ignores 0x0d
1: Carriage-return
2: Carriage-return+linefeed
1
Linefeed action * P3 0: Ignores 0x0d
1: Linefeed
2: Linefeed+carriage-return
1
Automatic emulation sensing
(For KPDL3)
P4 0:AES disabled
1:AES enabled
1 (U.S.A)
or
0 (Euro and
other)
Alternative emulation
(For KPDL3)
P5 Same as the P1 values except that 9 is ignored. 6
Automatic emulation
switching
trigger
(For KPDL3)
P7 0: Page eject commands
1: None
2: Page eject and Prescribe EXIT
3: Prescribe EXIT
4: Formfeed (^L)
6: Page eject, Prescribe EXIT and formfeed
10: Page eject commands; if AES fails, resolves
to KPDL
11 (U.S.A)
or
10 (Euro
and other)
Command recognition character P9 ASCII code of 33 to 126 82 (R)
Environment
Para
meter
Values
Factory
setting
To Next Page
Loading...
Need help?
General
