2PK/2PL/2PM/2PN
1-3-52
U612 Selecting if detection of trail edge margin is to be performed
This determines whether trailing edge margin is detected (to prevent image from being mutilated)
while printing a received Fax.
1. Select the setting using the cursor left/right keys.
* : Initial setting: ON
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U620 Setting the remote switching mode
Description
Sets the signal detection method for remote switching. Be sure to change the setting according to
the type of telephone connected to the machine.
Setting
1. Press the start key.
2. Select [REMORT MODE] and press the start key.
3. Select the mode using the cursor up/down keys.
* : Initial setting: ONE
4. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
ON The trail edge margin is detected.
OFF The trail edge margin is not detected.
Display Description
ONE One-shot detection
CONT Continuous detection
To Next Page
Loading...
Need help?
General
