Preparation before Use > Registering Destinations in the Address Book
180
Adding a Destination on One Touch Key
Assign a new destination (contact or group) to an one touch key.
NOTE
• Refer to the following for use of One Touch Key.
➡ Choosing from One Touch Key (page 266)
• You can add One Touch Keys and edit their settings on Command Center RX.
➡ Command Center RX User Guide
• If registering and editing of the One Touch Keys is restricted to administrators, you can edit the One Touch Keys
by logging in with administrator privileges.
➡ Edit Restriction (page 458)
➡ Command Center RX User Guide
1
Display the screen.
[System Menu / Counter] key > [FunctionSettings] > [One-Touch Key] > [Add/Edit One-Touch Key]
2
Add One Touch Keys.
1 Select a One Touch Key number for the destination > [Add/Edit]
Enter a number in [Search (No.)] and select (search icon) to display that One Touch Key.
Select a One Touch Key with no registered destination.
2 Enter the One Touch Key name displayed in the send base screen.
NOTE
For details on entering characters, refer to the following:
➡ Character Entry Method (page 742)
3 Select [Destination].
The Address Book appears.
To Next Page
Loading...
