User Authentication and Accounting (User Login, Job Accounting) > Enable User Login Administration
516
Enable User Login Administration
This enables user login administration.
Select one of the following authentication methods:
1
Display the screen.
1 [System Menu / Counter] key > [Job Accounting/Authentication]
NOTE
If the user authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login user name or password, please contact your administrator.
2 Select [User Login] from "User Login Setting".
2
Configure the settings.
• Select [Local Authentication] or [Network Authentication].
• Select [Off] to disable user login administration.
• If [Local Authentication] is selected, set [Local Authorization].
➡ Local Authorization (page 529)
• If [Network Authentication] is selected, set "Server Settings".
➡ Server Settings (page 530)
NOTE
If you cannot login because of the setting of the machine, login with any administrator registered in the local
user list and correct the settings.
Item Description
[Local Authentication] User authentication based on user properties on the local user list stored in the
machine.
[Network Authentication] User authentication based on Authentication Server. Use a user property stored in
Authentication Server to access the network authentication login page.
To Next Page
Loading...
