User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
530
Server Settings
Set the server type when network authentication is enabled.
1
Display the screen.
1 [System Menu / Counter] key > [Job Accounting/Authentication]
NOTE
If the user authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login user name or password, please contact your administrator.
2 Select "User Login Setting" [User Login] > [Network Authentication].
2
Configure the settings.
1 Select [NTLM], [Kerberos] or [Ext.] as the "Server Type" and enter the host name (256 characters or less)
for the Authentication Server.
When selecting [Ext.]. as the server type, enter the port number.
NOTE
• Selecting [Add/Edit/Delete Domain] displays the domain registration list. In the domain registration
list screen, select [Add/Edit], and enter the domain name. Up to 10 domain names can be registered.
• If two or more domains are registered, select [Default Domain] and select the default domain.
2 Select [OK].
NOTE
If the login user name and password are rejected, check the following settings.
• Network Authentication setting of the machine
• User property of the Authentication Server
• Date and time setting of the machine and the Authentication Server
To Next Page
Loading...
