User Authentication and Accounting (User Login, Job Accounting) > Configuring Job Accounting
565
Apply Limit
This specifies how the machine behaves when the counter has reached the limit of restriction. The action is as
follows:
1
Display the screen.
1 [System Menu / Counter] key > [Job Accounting/Authentication]
NOTE
If the user authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login user name or password, please contact your administrator.
2 "Job Accounting Setting" [Job Accounting Setting] > "Default Setting" [Apply Limit]
2
Configure the function.
1 Select [Immediately], [Subsequently], or [Alert Only].
Item Description
[Immediately] Job stops when the counter reaches its limit.
If sending or storing in the box is already underway, prohibition will
become effective from the next job.
[Subsequently] The print or scan job currently underway will continue but the
subsequent job will be rejected.
[Alert Only] Job continues while displaying an alert message.
To Next Page
Loading...
