Kyocera ECOSYS MA3500cix - Securitysettings; Security Quick Setup

System Menu > SecuritySettings
496
SecuritySettings
Configures security settings.
Security Quick Setup
[System Menu / Counter] key > [SecuritySettings] > [Security Quick Setup]
Item Description
[Security Quick Setup] Select security settings from levels 1 to 3 that are close to your
environment, and change (customize) the functions as needed.
Value
[Level 1]
The factory default setting.
[Level 2]
The security function of the network will change.
[Level 3]
All functions that protect the machine are enabled, and functions
that do not protect the machine are disabled.
NOTE
• This function can be set only when logged in with administrator
privileges.
➡ Log in as Machine Administrator or Administrator (page 111)
• Restart the device or network after selecting a level for the settings to
take effect.
➡ Restart Entire Device (page 495)
➡ Restarting the Network (page 494)
• If you change the security settings after selecting a level, the security
quick setups will show as "Custom".
• For more information on each security level setting, refer to the
following:
➡ Security Quick Setup Function List (page 765)