Installing and Setting up the Machine > Default Settings of the Machine
73
Network Setup
Configuring the Wired Network
The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP
(IPv4), TCP/IP (IPv6), NetBEUI, and IPSec. It enables network printing on the Windows, Mac, UNIX and other
platforms. The configuration methods are as follows:
NOTE
When you want to switch to the network interface other than Wired (default) after installing an optional Network
Interface Kit (IB-50) and a Wireless Network Interface Kit (IB-37/IB-38/IB-51), select the desired setting on [Primary
Network (Client)].
➡ Primary Network (Client) (page 495)
For other network settings, refer to the following:
➡ NetworkSettings (page 471)
Configuration Method Description
Configuring the Connection from
the Operation Panel on This
Machine
Use Quick Setup Wizard when configuring the network in a wizard-style
screen, without setting individually in System menu.
➡ Configuring Settings Quick Setup Wizard (page 89)
Use Wired Network Settings or Optional Network to configure the
network in details from System menu.
➡ Wired Network Settings (page 479)
➡ Optional Network (page 491)
Configuring Connections on the
Web Page
For the equipped network interface, the connection can be set by using
Command Center RX. For the IB-50, the connection can be set on the
dedicated Web page.
➡ Command Center RX User Guide
➡ IB-50 Operation Guide
Setting the Connection by Using
the Setup Utility of IB-50
This is the setup tool included in the CD of IB-50. You can use it on
Windows.
➡ IB-50 Operation Guide
To Next Page
Loading...
