Operation on the Machine > Using a Fax Server to Send (Fax Server Send)
262
NOTE
• When selecting the information from the Address Book, select [Address Book], and specify the
destination > [OK].
➡ Choosing from the Address Book (page 265)
• When selecting the information from an External Address Book, select [External Address Book], and
specify the destination > [OK].
For details on the External Address Book, refer to the following:
➡ Command Center RX User Guide
5
Configure the functions.
Select the Global Navigation to display other functions.
➡ Send (page 301)
6
Press the [Start] key.
NOTE
When selecting On for "Destination Check before Send", the confirmation screen appears.
➡ Confirmation Screen of Destinations (page 268)
7
Press the [Start] key.
NOTE
A confirmation prompt is displayed on the screen if more than one destination is specified. Confirm and
select [Yes]. Sending starts.
To Next Page
Loading...
