System Menu > NetworkSettings
484
[ThinPrint]
[LPD]
[Raw]
Item Settings
[Protocol Settings] Set whether to use ThinPrint. To use it, select On in these settings. The
factory default port number is 4000.
*1*2
Value: Off, On
NOTE
This feature does not appear if the optional ThinPrint Option is not
running.
[ThinPrintoverTLS] To use ThinPrint over TLS, select [On] for this setting, and for [TLS] in the
"SecuritySettings", select [On].
Value: Off, On
NOTE
When the setting is On, TLS certificate is required. The factory certificate
is the certificate owned by the machine.
[Available Network] Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Item Description
[Protocol Settings]
Set whether to send documents using LPD.
*1
Value: Off, On
[Available Network] Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Item Description
[Protocol Settings]
Set whether to receive documents using the Raw Port.
*1
Value: Off, On
[Available Network] Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
To Next Page
Loading...
