User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
541
2 Enter the user name to be displayed.
NOTE
For details on entering characters, refer to the following:
➡ Character Entry Method (page 742)
3 Select [Select user].
4 To specify the user from local users, select [Local User]. To specify from network users, select [Network
User].
The procedure differs depending on the transmission method selected.
5 (When specifying the user from [Local User]) Select the user to be set for simple login.
NOTE
• Search by name or login user name. Select either [Search(Login)] or [Search(Name)] to switch
between[Search(Login)] and [Search(Name)].
• Select [User Name] or [Login User Name] to sort the user list.
6 (When specifying the user from [Network User]) Select the entry field for "Login User Name" and "Login
Password", enter the information of the user to be registered, and select OK[OK].
If you are specifying a user for whom a domain is set in network authentication, select the "Domain"and
select the domain where the user is registered.
NOTE
For details on entering characters, refer to the following:
➡ Character Entry Method (page 742)
7 Select [Password] Off or On.
8 Select the user icon to be displayed.
3
Register the user.
1 Select [Save].
To Next Page
Loading...
