EasyManua.ls Logo

Kyocera ECOSYS MA3500cix - Page 623

Kyocera ECOSYS MA3500cix
798 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting > Troubleshooting
613
Is the print job paused?
Resume printing.
1
Display the screen.
1 Select the [Status / Job Cancel] key.
2
Select [Pause AllPrint Jobs] on the printing jobs status screen.
Printing is paused.
When resuming the printing of jobs that have been paused, select [Resume AllPrint Jobs] .
Are there a mixture of inaccessible addresses?
If you have configured wired and Wi-Fi networks with name resolution, you may have a mix of IP addresses
(private addresses) on the other inaccessible network.
IMPORTANT
Only one host name and one domain name can be used on this machine. Please consider this limitation when
setting the network operation.
1
[System Menu / Counter] key > [NetworkSettings] > "Others" > [Primary Network
(Client)]
Select Wi-Fi, Wired or Optional Network as the network to use without restrictions.
Primary Network (Client) (page 495)
2
[System Menu / Counter] key > [NetworkSettings] > "Network Settings" [Protocol
Settings]
Please [Enable] either [Wired Network] or [Wi-Fi] and [Disable] the other.
Protocol Settings (page 483)
3
In Command Center RX, change the settings for name resolution of NetBEUI, DNS,
etc., or change the network environment settings.
Command Center RX User Guide

Table of Contents

Related product manuals