Troubleshooting > Troubleshooting
626
Calibration needs to be performed.
1
Display the screen.
1 [System Menu / Counter] key > [Adjustment/Maintenance] > "Image Adjustment" [Image Adjustment]
2
Perform the calibration.
1 Perform the calibration.
Calibration begins.
Developer refresh needs to be performed.
1
Display the screen.
1 [System Menu / Counter] key > [Adjustment/Maintenance] > "Image Adjustment" [Image Adjustment]
2
Perform the Developer Refresh
1 Perform the Developer Refresh.
Developer Refresh begins.
NOTE
Waiting time may be longer when the toner is refilled during developer refresh.
Laser scanner cleaning needs to be performed.
1
Display the screen.
1 [System Menu / Counter] key > [Adjustment/Maintenance] > "Image Adjustment" [Image Adjustment]
2
Perform the laser scanner cleaning.
1 Perform the Laser Scanner Cleaning.
Laser Scanner Cleaning begins.
To Next Page
Loading...
