Troubleshooting > Troubleshooting
633
Printed images are shifted
Is the original set correctly?
• When setting the original on the platen, make sure to align the original with the original size indicator plate.
➡ Placing Originals on the Platen (page 220)
• When loading the original in the document processor, make sure to align the original width guides before
loading the original.
➡ Loading Originals in the Document Processor (page 223)
Is the paper loaded correctly?
Adjust the paper length guide and width guide of the cassette to fit the paper size.
➡ Loading in the Cassettes (page 141)
The altitude is 1000 m or higher and irregular horizontal white
lines appear in the image.
1
Select the [System Menu / Counter] key > [Adjustment/Maintenance] >
"Others"[Altitude Adjustment] ,and set to an elevation one level higher than the
current setting.
The altitude is 1000 m or higher and dots appear in the image.
1
Select the [System Menu / Counter] key > [Adjustment/Maintenance] >
"Others"[Altitude Adjustment] ,and set to an elevation one level higher than the
current setting.
To Next Page
Loading...
