Troubleshooting > Troubleshooting
650
Is the machine connected to the network correctly?
➡
Connecting LAN Cable (page 42)
➡ Network Setup (page 73)
NOTE
If Auto Error Clear is set to [On], the process will resume automatically after a set period of time. For details, refer
to the following:
➡ Auto Error Clear (page 435)
"Cannot connect to Server." is displayed
Check the connection status with the server.
"Cannot connect." is displayed
Wi-Fi or Wi-Fi Direct connection could not be completed.
Check the settings and signal conditions.
➡ Wi-Fi Direct Settings (page 472)
➡ Wi-Fi Settings (page 473)
"Cannot duplex print on this paper." is displayed
Have you selected a size or type of paper that cannot be duplex printed?
• Select [Continue] to cancel duplex printing and continue printing.
• Select paper from a different paper source and press [Continue] to change the paper for printing.
• To cancel, select [Cancel].
"Cannot perform remote printing." is displayed
Remote printing is prohibited.
The job is canceled. Select [End].
To Next Page
Loading...
