Troubleshooting > Troubleshooting
664
"Toner[C][M][Y][K]is empty." is displayed
Replace the toner container to our specified toner container.
NOTE
If there is still black toner left even after color toner has run out and "Color Toner Empty Action" is set to [Print in
Black & White], black and white printing is possible temporarily.
CAUTION
Do not attempt to incinerate parts which contain toner. Dangerous sparks may cause burns.
Installation procedures of the toner container is same for every color. Here, we'll explain the procedures for the
yellow toner container, as an example.
1
Open the Scanner Unit
2
Remove the toner container.
To Next Page
Loading...
