Installing and Setting up the Machine > Default Settings of the Machine
76
Wired Connection with LAN Cable Using Wi-Fi Setup Tool
To send the Wi-Fi settings configured in the Wi-Fi Setup Tool to the machine, connect the computer or mobile
device with the machine locally. To use a wired LAN cable directly connected to the machine, the Auto-IP
(Link-local) address will be assigned to the machine and the computer. This machine applies Auto-IP as the default
settings.
NOTE
Configure the settings on the operation panel if your computer supports WPS.
➡ Wi-Fi Settings (page 473)
➡ Wireless Network (page 491)
1
Connect the machine with a computer.
1 Connect the machine with a computer via LAN cable when the machine is powered on.
2 Turn on the computer.
IP addresses (link local addresses) of the machine and computer are generated automatically.
2
Launch the Wi-Fi Setup Tool.
1 Launch your Web browser.
2 Enter "https://kyocera.info/" into the browser’s address bar or location bar.
3 Enter and search the product name, and select this product from the candidate list.
To Next Page
Loading...
