Kyocera ECOSYS P4140dn - Editing an Account

9-19
User Authentication and Accounting (User Login, Job Accounting) > Setting an Account
Editing an Account
This changes the registered account information.
1
Display the screen.
1 [Menu] key > [▲] [] key > [User/Job Account] > [OK] key
2 [▲] [▼]
key > [Job Account.Set.] > [OK] key > [▲] [▼] key > [Account. (Local)] > 
[OK] key
> [▲] [▼] key > [Account. List] > [OK] key
2
Edit an account.
1 Select the account you want to change and select the [OK] key.
2 [▲] [] key
> [Detail/Edit] > [OK] key
3 Se
lect the item you want to change, and select the [OK] key.
4 Re
fer to step 2 of "Adding an Account" and "Restricting the Use of the Machine" to change
account information.
5 Se
lect the [OK] key.
The account information is changed.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 4000
Login Password: 4000
Adding an Account (page 9-17)
Restricting the Use of the Machine (page 9-18)