Kyocera ECOSYS PA5500 Series

8-20
Setup and Registration (System Menu) > Operation Method
Wired Netwk. Set
[ Menu ] key > [ ] [ ] key > [ Network ] > [ OK ] key > [ ] [ ] key > [ Wired Netwk. Set ] > [ OK ] key
Configure wired network settings.
ProtocolSettings
[ Menu ] key > [ ] [ ] key > [ Network ] > [ OK ] key > [ ] [ ] key > [ ProtocolSettings ] > [ OK ] key
Configure protocol settings.
Item Description
TCP/IP Settings For details on setting value.
TCP/IP Settings (page 8-18)
LAN Interface Specify the settings for the LAN interface to be used.
Value: Auto, 10BASE-Half, 10BASE-Full, 100BASE-Half, 100BASE-Full, 1000BASE-T
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
Bonjour -
Off/On Select whether to use Bonjour.
*1
Value: Off, On
Available Net. -
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Off/On] is set to [On].
Wi-Fi
*2
Wired Network
IP Filter (IPv4) -
Off/On Select whether to communicate using IP Filter (IPv4).
*1
Value: Off, On
IP Filter (IPv6) -
Off/On Select whether to communicate using IP Filter (IPv6).
*1
Value: Off, On
IPSec -
Off/On Select whether to use IPSec.
*1
Value: Off, On