Kyocera FS-1030MPF

2MH/2MJ/2MK/2ML-2
1-4-5
4301 Duplex sensor non arrival
jam
The eject sensor (ES) does not turn on after a
switchback start, during paper feed from cassette
1.
G
4302 The eject sensor (ES) does not turn on after a
switchback start, during paper feed from cassette
2.
G
4303 The eject sensor (ES) does not turn on after a
switchback start, during paper feed from cassette
3.
G
4308 The eject sensor (ES) does not turn on after a
switchback start, during paper feed from duplex
section.
G
4309 The eject sensor (ES) does not turn on after a
switchback start, during paper feed from the MP
tray.
G
4311 Duplex sensor stay jam The eject sensor (ES) does not turn off after a
switchback start, during paper feed from cassette
1.
F
4312 The eject sensor (ES) does not turn off after a
switchback start, during paper feed from cassette
2.
F
4313 The eject sensor (ES) does not turn off after a
switchback start, during paper feed from cassette
3.
F
4318 The eject sensor (ES) does not turn off after a
switchback start, during paper feed from duplex
section.
F
4319 The duplex sensor (DUS) does not turn off after a
switchback start, during paper feed from the MP
tray.
F
9000 No paper feed from DP DP timing sensor (DPTS) does not turn on during
original feed from DP (Retry 5 times).
H
9001 DP original conveying jam DP timing sensor (DPTS) turns off within the speci-
fied time since the sensor turns on.
H
9003 DP original switchback jam
During duplex switchback scanning, the DP timing
sensor (DPTS) does not turn off within specified
time.
H
9004
During duplex switchback scanning, the DP timing
sensor (DPTS) does not turn on within specified
time since original switchback operation starts.
H
9011 DP top cover open The DP top cover is opened during original feed-
ing.
H
Code Contents Conditions
Jam
location*
*: Refer to figure 1-4-2 for paper jam location (see page 1-4-2).