2MH/2MJ/2MK/2ML
1-5-54
6. Remove the forwarding pulley assem-
bly.
Figure 1-5-81
Detaching the feed pulley
7. Remove the stopper A.
8. Remove the feed pulley assembly from
the LF holder.
9. Remove the stopper B.
10. Remove the PF collar, spring, spring
collar S and pin from the PF shaft.
11. Remove the feed pulley, one-way
clutch, PF pulley gear and pin from the
PF shaft.
Figure 1-5-82
To Next Page
Loading...
