7-38
FAX Operations
Basic Transmission
1 Use an application on your computer to create the document to be sent.
2 Select Print from the File menu. The Print screen for the application that you are using will
appear.
3 Use the drop-down menu in the Name field to select the name of the machine to be used
as the FAX Driver.
4 Enter the page numbers, etc., to be faxed.
5 Click Properties to open the Properties screen.
6 Specify fax settings such as the original size on the FAX Setting tab, and click OK.
7 You will return to the Print screen for the application. Click OK. The Transmit Settings
screen will appear.
Note Make sure that the number of copies is set to 1. The following screen is an
example. The actual dialog box will vary depending on the application that you are
using.
Note For detailed information on the settings on the tab, refer to Configuring the
Driver Default Settings on page 7-40.
To Next Page
Loading...
