Settings Pages
Run once now
Click the Receive button to immediately receive E-mail from the POP3
server.
E-mail Address
Enter the E-mail address for i-FAX. The E-mail address is displayed in
Sender Address on FAX / i-FAX > i-FAX > SMTP on page 6-29.
POP3 Server Name
Enter the POP3 server name or IP address.
POP3 Port Number
Enter the POP3 port number or use the default port number 110.
POP3 Server Timeout
Enter the timeout in seconds during which this machine tries to connect to
the POP3 server.
Login User Name
Enter the login name of the user.
Login Password
Enter the password for connecting to the user name above.
Use APOP
Enables (On) or disables (Off) APOP.
Test
Tests to confirm that the settings on this page are correct. When the Test
button is pressed, this machine tries to connect to the POP3 server.
E-mail Size Limit
Enter maximum E-mail size in Kilobytes. When the value is 0, the limitation
for E-mail size is disabled.
Cover Page
Specifies whether to print the body of the E-mail in addition to the attached
files.
When this item is set to On, the attached files and the body of the E-mail are
printed.
When no attached files exist, only the body of the E-mail is printed. When
this item is set to Off, only the attached files are printed. When no attached
files exist, nothing is printed.
FAX / i-FAX > i-FAX > Domain Restrictions > General
The section below provides a summary of the items displayed on the Domain
Restrictions page.
SMTP Restriction
Selects the restriction level from Off, Reject, and Permit.
POP3 Restriction
Selects the restriction level from Off, Reject, and Permit.
COMMAND CENTER RX 6-31
To Next Page
Loading...
Need help?
General
