1
Before You Start
Cautions
To avoid machine malfunction, do not use the equipment under the following conditions:
• Direct exposure to sunlight
• Extremely high or low temperature [temperature range: 10˚C to 32.5˚C
(50˚F to 90.5˚F)]
• Extremely high or low humidity (humidity range: 20% to 80% RH)
• Condensation due to rapid change of temperature
• Areas of poor ventilation
• Areas of high dust or chemical
fume concentration (solvent etc.)
• Unstable or unlevel surfaces • Directly in front of air
conditioning vents
• Liquids near the equipment
• Too much media which exceeds
the limit mark on the guide of
the tray.
• Front/right/left covers opened
while the printer is operating. It
may cause a media jam.
• We strongly recommend to use
only the original Kyocera toner
developer. Use of Kyocera toner
developer assures the intended
long term reliability of the printer.
Genuine or Original
To Next Page
Loading...
Need help?
General
