Kyocera FS-5800C - Using a Parallel Interface Cable

24
Setup
Using a Parallel Interface Cable
If you do not have a parallel interface cable, you will need to purchase one from your local
computer store or dealer (☞ P. 116 for Parallel Interface specifications).
1
Make sure the computer, printer and the other connected peripheral
devices are turned off.
2
Connect the parallel interface cable to the computer’s parallel
interface connector and the printer’s parallel interface connector
(marked as Parallel).
Notes:
• The actual connector on the computer may vary depending on the manufacturer of
the computer. Consult the computer’s documentation.
• If the cable is connected to the PC via a printer buffer or selector, the printer may
not print.
3
Connect the power cord to the printer’s AC inlet and to an AC outlet.
Computer’s parallel
interface connector
Parallel interface
cable
Power cord