Kyocera FS-5800C - Installing the Driver Software; Installing the Printer Driver for Windows 3.1

27
Setup
Installing the Driver Software
The driver software installation will create the printer driver for Windows 3.1 or
Windows 95.
Note:
When reinstalling the driver software, do it immediately after restarting windows.
Installing the Printer Driver for Windows 3.1
1
Start Windows 3.1.
2
Quit all applications.
3
Insert the Kyocera Digital Library CD-ROM into your computer’s CD-
ROM drive.
4
Double click on the Control Panel.
5
Double click on Printers.
6
Click on Add >>.
7
A screen for “List of Printers:” will appear. From the choices, click on
Install Unlisted or Updated Printer.
8
Click on Install....
9
The install driver menu will appear. Type in your CD-ROM drive
name followed by one of the following directory paths depending on
your country:
USA/Canada/Asia/Pacific: \kei\pcl\3x
U.K.: \keu\pcl\3x
Germany: \kee\pcl\3x
France: \kef\pcl\3x
Note:
To install the KPDL printer driver, select “\kpdl” in place of “\pcl” in each line above.
10
Select Kyocera FS-5800C Enhanced from the printers displayed and
click on OK. Once the driver has been installed, close the Control
Panel by clicking on Close.