16
Setup
Loading Media
Loading Paper or Transparencies in the Media
Cassette
The printer is shipped with a media cassette (either Letter paper or A4 paper) installed.
The printer can also use five different trays as options:
Cassette Size
A4 Paper 210 mm × 297 mm
A4 Transparency 210 mm × 297 mm
Letter Paper 8.5" × 11"
Letter Transparency 8.5" × 11"
Legal Paper 8.5" × 14"
Notes:
• Make sure that you load the correct media. Each tray is designed and labeled for
only paper or transparency. If you load the incorrect media type in a tray, it may
cause a jam.
• If you have the Paper Feeder PF-80 installed:
– If you wish to use the automatic cassette-switching feature (a large print job, for
example), make sure that all cassettes in the printer are the same media type
(paper only) and size.
– The transparency cassette should only be inserted in the upper or middle cassette
slots.
Note:
The printer does not automatically switch cassettes if the media type of the cassette is
Transparency.
1
Pull the media cassette out of the printer.
2
Remove all packaging materials from inside the media cassette;
refer to the instruction sheet attached to the cassette.
To Next Page
Loading...
