14
Setup
Installing the Toner Developers
Note:
The toner developers that are shipped with the printer are starter developers. They
are installed in exactly the same manner as the optional developers; the only
difference is that the starter developers have less toner. (The page life expectancy is
3,000 pages, which is based on a 5% image area.)
1
Remove the packaging from the toner developer.
2
Remove the shipping cover from the developer.
Caution:
To avoid possible toner spillage, do not tilt developer.
Note:
Save all packing material for shipping purpose.
3
Open the right side cover.
Caution:
Do not leave the right side cover open for more than 1 minute; the imaging unit will
be exposed to light and could be damaged.
To Next Page
Loading...
