9
Before You Start
Interface Indicator
The interface indicator indicates the interface over which data is currently being received
or was last received. The current interface is indicated by one of the following messages:
Display Description
PAR Parallel interface
SER Serial interface
OPT Optional interface (if a network interface card is installed)
Note:
The display will blink while the printer is receiving data and continue blinking until
the interface is released, even after data transmission is finished.
Resolution Indicator
This shows the current printing resolution in either 1200 or 600 dpi (dot-per-inch).
Paper Size Indicator
This indicator indicates the paper size of the cassette currently selected. The following
abbreviations are used to indicate the paper sizes:
Indicator Paper Size
A4 ISO A4 (21 × 29.7 cm)
EX Executive (7-
1
/
4
× 10-
1
/
2
inches)
B5 JIS B5 (18.2 × 25.7 cm)
LT Letter (8-
1
/
2
× 11 inches)
LG Legal (8-
1
/
2
× 14 inches)
b5 ISO B5 (17.6 × 25.0 cm)
Copy Indicator
This indicator indicates the number of copies to print from 001 to 999. This number is
reduced as printing proceeds.
To Next Page
Loading...
