44
Using the Printer
■ Memory card
The MEMORY CARD menu reads, writes, and deletes data on the memory card. It also allows
formatting the memory card and printing a list of the contents. This menu is available only
when a memory card is inserted into the memory card slot at the back of the printer (☞ P.
51). For instructions on using these submenus, refer to page 51.
Level 1 Level 2
MEMORY CARD > Read fonts
Read macro
Read data
Write data
Delete data
List of Partitions
■ Life counters
The Life counter menu displays the page count of the printer and the consumption of
supplies. It gives you an idea when the following supplies need to be replaced.
1
The
Reset transfer roller option should be used after replacing the transfer roller to a
new one. Selecting this option resets the transfer roller counter to ‘00000.’
Level 1 Level 2 Range Level 3
Life counters Total print 0000000 to 9999999
pages
TransferRoller 0000000 to 9999999 Reset transfer
pages roller
Imaging unit 0000000 to 9999999
images
Fuser KIT 0000000 to 9999999
pages
Oil supply roll 0000000 to 9999999
pages
1
When a supply is replaced with a new one, the printer automatically reset the page counter for
that supply to ‘0000000’.
To Next Page
Loading...
