Chapter 5 Troubleshooting
5-7
Printed Results Corrective Action
Dirt on the top edge or back of the paper Check the transfer roller.
Lift the process unit out of the printer and check whether the
transfer roller is dirty. If so, print several pages to eliminate
the dirt.
Check the registration roller.
Lift the process unit out of the printer and check whether the
registration roller is soiled with toner. If so, wipe it clean using
the supplied cleaning cloth.
Characters out of position. Check the file or program.
See if the problem is caused by an error with PRESCRIBE IIe
commands. If the problem occurs only with a specific file or
program, the most likely cause is an error in a parameter to a
command or command syntax.
To Next Page
Loading...
