2MW/2MX
1-3-53
U250 Checking/clearing the maintenance cycle
Description
Changes preset values for maintenance cycle and automatic grayscale adjustment.
Purpose
Provides changing the time when the message to acknowledge to conduct maintenance and
automatic grayscale adjustment is periodically displayed.
Setting
1. Press the start key.
2. Select the item to be changed.
3. Change the setting using the cursor left/right keys or numeric keys.
4. Press the start key. The setting value is set.
Clearing
1. Select [Clear].
2. Press the start key. The setting value is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U251 Checking/clearing the maintenance counter
Description
Displays and clears or changes the maintenance count and automatic grayscale adjustment
count.
Purpose
To verify the maintenance counter count and automatic grayscale count. Also to clear the count
during maintenance service.
Setting
1. Press the start key.
2. Select the item to be changed.
3. Change the setting using the cursor left/right keys or numeric keys.
4. Press the start key. The setting value is set.
Clearing
1. Select [Clear].
2. Press the start key. The setting value is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description Setting range
M.Cnt A Preset values for maintenance cycle 0 to 9999999
M.Cnt HT Preset values for automatic grayscale
adjustment
0 to 9999999
Display Description Setting range
M.Cnt A Count value for maintenance cycle 0 to 9999999
M.Cnt HT Automatic grayscale adjustment count 0 to 9999999
To Next Page
Loading...
