Kyocera FS-920 - Printer Specifications; FS-720;820;920 Specs and Hardware

2GL/2FV/2FW
1-1-1
1-1 Specifications
1-1-1 Specifications
16 ppm GDI printer (FS-720)
Type................................................Desktop
Printing system ...............................Electrophotographic printing
Paper type ......................................Paper cassette: Plain paper (60 to 105 g/m
2
)
Recycled paper (60 to 105 g/m
2
)
Thick paper (90 to 105 g/m
2
)
Manual feed tray: Plain paper (60 to 163 g/m
2
)
Recycled paper (60 to 163 g/m
2
)
Thick paper (60 to 163 g/m
2
)
Special paper: Transparencies, labels, envelopes, postcards, tracing paper
Paper sizes.....................................Paper cassette
A4 (210 × 297 mm)
B5 (182 × 257 mm)
A5 (148 × 210 mm)
Folio (210 × 330 mm)
Letter (8
1
/
2
" × 11")
Legal (8
1
/
2
" × 14")
Officio II (8
1
/
2
" × 13")
Non-standard size (148 × 210 mm to 216 × 356 mm)
Manual feed tray
A4 (210 × 297 mm)
B5 (182 × 257 mm)
A5 (148 × 210 mm)
Folio (210 × 330 mm)
Letter (8
1
/
2
" × 11")
Legal (8
1
/
2
" × 14")
Officio II (8
1
/
2
" × 13")
Non-standard size (70 × 148 mm to 216 × 356 mm)
Print speeds....................................A4: 16 pages/minutes
Letter: 17 pages/minutes
First print time.................................9 seconds or less (ready), 21 seconds or less (sleep)
Warm-up time .................................15 seconds or less (power on), 11 seconds or less (sleep)
Paper feed system..........................One universal cassette and one manual feed tray
Paper loading capacity ...................Paper cassette: 250 sheets (80 g/m
2
, 0.11 µm)
Manual feed tray: 1 sheet (80 g/m
2
, 0.11 µm)
Paper exit system.............................. Face down: 100 sheets (80 g/m
2
, 0.11 µ m)
Photoconductor...............................OPC drum (diameter 30 mm)
Charging system.............................Scorotron (positive charging)
Developing system .........................Mono component dry developing method
Toner replenishing: Automatic from the toner container
Transfer system ..............................Transfer roller (negative-charged)
Separation system..........................Small diameter separation
Fixing system..................................Heat roller system
Charge erasing system...................Exposure by eraser lamp (LED)
Cleaning system .............................Drum: Counter blade