Kyocera FS-920 - Page 12

2GL/2FV/2FW
1-1-2
Controller hardware ........................CPU: 32 bit RISC CPU
System ROM: 1 Mbit (on-board)
Main RAM: 8 MB (on-board)
Interface..........................................USB: Full-Speed USB2.0
Controller software..........................Host based
Resolution.......................................600 dpi mode (600 × 600 dpi)
Dimensions (H × W × D) .................245 × 380 × 390 mm/9.6" × 15.0" × 15.4"
Weight.............................................Main unit: 9.2 kg/20.3 lbs
Power source..................................220 - 240 V AC, 50/60 Hz (European countries), 120 V AC, 60 Hz (U.S.A./Canada)
Power consumption ........................Maximum: 830 W (220 - 240 V model), 823 W (120 V model)
Normal operating: 302 W (220 - 240 V model), 295 W (120 V model)
Ready: 5 W (220 - 240 V model), 5 W (120 V model)
EcoPower: 4.2 W (220 - 240 V model), 3.8 W (120 V model)
Current............................................3.4 A (220 - 240 V model), 6.8 A (120 V model)
Noise...............................................Printing: 49 dB(A), Ready: 28 dB(A)